Rear Lower Grill

[ace]

How is this grill removed from the bumper on the SRi???

Have uncliped the 2 clips, have removed the 6 rivets. But there's loads of teeth that I can't seem to release. My hands are in shreds trying to release them. .

Any one know how to release these please. Thanks

[ditchp]

i used a butter knife and pushed it through from the front so to release the blooooooody things hth

[pogo]

TBH its a ****in nightmare to remove as the lugs are very tight that hold it to the bumper and invariably break off when you finally get it free,perseverence is the name of the game mate,i actuaLLY thought about leaving it off and grinding back the ridge that holds it as it makes ther back end look less bulky,you will see what i mean when you eventually prise it off mate

[Caterman]

As above m8, a very thin knife pushed through to prise the clips free. It can be a sod to get off

[dazzer t]

i took the stanley knife to mine, once you have removed it the lugs just push out and the new one goes on dead easy.

[thegoldenbullet]

can you get different ones then?

[pogo]

can you get different ones then?

yep vxr insert,jdl and steinmetz all do replacement ones

[ditchp]

can you get different ones then?

VXR springs to mind m8, and only about 30quid ready primed
thats what i have on mine

[ace]

Sorry.....I just killed it. Got really miffed and pulled it out but it broke as well. Didn't have the patience. 100% true this job is a ***** to do. Thanks for your help.

[Caterman]

...but the new one goes in a lot easier