I have been reading the other theads about folding mirrors, but they don't seem to have a conclusion.
Could someone please summarise what is required and how much?
I have been reading the other theads about folding mirrors, but they don't seem to have a conclusion.
Could someone please summarise what is required and how much?
thats the question, ONE or TWO door modules. it really isn't clear what i need.
No definitive answer on that - that's the thing. With mine being a Signum Elite all I needed was a different Drivers Door Module (DDM) - others needed to have both modules replaced.
I know you've viewed the thread - but do have a top to tail read of this thread if you haven't already. It's got all the info in there that has been accumulated so far with four (if not more) of us doing the mod.
D
ok then tell us exactly wot model ya car is and has your car got the
following and then i`ll tell you wot parts you need and i`ll also as a
bonus throw in the part numbers in wot you need aswell-
1. anti dazzle interior rear view mirror
2. auto dim drivers door mirror
3. electrically adjustable seats with memory
Mines also an elite, i'll read it again......see if i missed something
It's an elite with no dipping mirrors (VX ommitted them on 05MY for some reason) and no memory seats
You brave man!! I remember when I went through EPC to see what I needed it was like a ferking minefield!!! - not helped by the way Vx often describe things! It wasn't helped by the fact that I had both interior dimming mirror and electric memory seats so had to make sure I got the right parts! The stupid (read as confusing!!) thing is that the DDM that I needed to get in the end that made it all work correctly didn't mention anything about memory seats yet it worked fine (as it was the same module that everyone else got!) I think we deduced that in terms of door modules, EPC ultimately drilled down to just one PDM and one DDM as all the other ones had been superseded by these two parts - listed earlier in this thread.
It was the mirror housings where there was a bit of a difference depending on whether you had memory seats etc and I remember I ended up with a different part number to what you and Dean did (and probably Paul).
D
right in that case and based on the info you ave supplied here is wot you
will need -
1 x l/h folding mirror housing p/no 24440001
1 x r/h folding mirror housing p/no 24439999
1 x l/h door module p/no 13193367
1 x r/h door module p/no 13193366
you use your existing door mirror glasses/ adjustment motors and also
mirror covers,just swap them all over and they fit new door mirror housings
then its just the case of getting it re programmed by your dealer if they
know wot to do as its tricky to do if they dont know how to use tech2
properly.
oh and your existing drivers door switch will also work to fold/unfold its just it aint got
the symbol to show you have folding mirrors unless you want to pay £40 for just
the sake of the symbol like i did.
p/s if you go for these then i have a brand new drivers side folding mirror
housing that i can sell you.
Last edited by andy.l; 22nd May 2007 at 19:35.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks