Air Box screws

[irmscherTI]

Hi all,
Having just fitted a K&N air filter to my 1.9 CDTI 150 i have misplaced (LOST!) one of the Air box cover screws.I have contacted VX and have been told I will need to purchase a complete new Air box as the screws do not come as a seperate item.
I have tried local dismantlers and scrap yards but have been unsuccesful.

Does anyone know of a place I find one of these screws?
Ta

[vectra 120]

Lost mine some were in the engine so I need one too also when fitting the caterman I lost one of the screws from the engine cover and was told the same

Steve

P.s I will check some scrap yards up here too see if thay have any.

[wardy]

A bit late to tell you, but when doing the air filter / box mod, you don't need to remove the screws fully. They go loose about half way out & at that point you can remove the lid with the screws still attached to the lid part.

[fellie]

self tapper if the scrappies have non

[irmscherTI]

Lost mine some were in the engine so I need one too also when fitting the caterman I lost one of the screws from the engine cover and was told the same

Steve

P.s I will check some scrap yards up here too see if thay have any.

Thanks

[irmscherTI]

self tapper if the scrappies have non

Thanks

[irmscherTI]

A bit late to tell you, but when doing the air filter / box mod, you don't need to remove the screws fully. They go loose about half way out & at that point you can remove the lid with the screws still attached to the lid part.

Thanks

[dragracer]

Only cpl filter box or parts named with numbers

[RykuZ0]

Did you get anywhere with this? I managed to lose 2 of the little so and so's this afternoon!

[vectra 120]

No still looking around scrap yards up here