NEW irmscher Grilles

[Graeme]

Steeve at irmscher uk has sent us pictures of the latest mesh grilles they are making for the vectra c and signum. Only got pictures of the face lift from them at the moment but please feel free to add comments and i will compile and feedback. I will confirm that these are going to be made for the pre facelift as well but we did see one at irmscher uk en route to germany so they should be. Heres the info i have and pictures.

Mesh Grilles for Vectra and Signum

This month sees an exciting addition to the Irmscher range - Mesh Grilles suitable for current Vectra and Signum models (06MY onwards).

Produced out of stainless-steel woven wire mesh and specifically developed for the Vectra and Signum range, these grilles fit in harmony with the OE Vauxhall grille including the 'V' section.

Fitting is easy, the grilles simply slot over the slatted section of the OE grille and the one-way clip then holds the mesh grille in place.

Part numbers as follows:

i 34 01 080 Upper Grille set - Left and Right
i 34 01 083 Lower Grille
i 99 03 330 Grille set consisting of Upper (L & R) and Lower Grilles

Price Structure:

i 34 01 080 RRP exc VAT £135,32
i 34 01 083 RRP exc VAT £123,40
i 99 03 330 RRP exc VAT £234,04

- the upper grilles should be available within the next two weeks with the lower grille following within 2-3 weeks afterwards (all being well!)

[Harry]

not my bag i'm afraid, it looks far too obvious a mod. and the fact that it's SO different to the fog grilles makes it stand out way to much.

and WAY to pricey for something that is essential just wire mesh cut to size with a clip. at first i thought they had replaced the standard black grille, but reading through properly it's just a cover over the existing.

if you wanted this look then i'd take a look at Andy's (Pioneer) grille on his vectra, same effect for alot less £££

not one of irmschers smartest products.

they need to get rid of the existing plastic grille and replace the bright stainless mesh with black mesh, would look much smarter.

big thumbs down i'm afraid. but that's just my opinion

[kev666]

Very chav. Don't like them at all. It seems to me like someone is trying to profiteer. Just because it has come from irmscher.
What ever happened to taste and style??
Simple and clean is nice. That's why people are prepared to pay a premium for it. Get it wrong and you get nasty but expensive.
Thumb's down for me to.
Kev

[dazzer t]

not impressed with that to bling bling for me, somthing a bit more subtle and a little less boy racer is wots needed and as your man above says you could make them yourself a lot cheeper.

[BlueRob]

I prefere the sporty looks on the older ones than the "fancy bling" look on this new ones, IMO

[nickc]

got to agree with whats been said so far.... thumbs down from me aswell.

i wouldnt fit these -regardless of cost or who it is made by judging on these pics.

the traditional cross hatch irmscher grilles are the only way to go!

[daviek]

A definate no-no from me looks like mesh you get from harlfords etc and would be more suited to a cheap fibre-glass bodykitted saxo,corsa,fiesta IMO

[spoons]

My first impressions when I saw them a few weeks back were "Horrible" dont like them...

However, I think they are on the wrong car...

I would like to see it on a pomegranite red signum, for instance.... or a star silver vectra...

Deffo not a black vectra SRi though !!

Then I can make my mind up

[GARY3306]

Not keen myself. It's hard not to think of it as the mesh stuff you get from Halfrauds.

[yorkshireborn]

must be me then i like em but not on a dark car need to be on a silver or light coloured car.
only downside to them is the price way too exspensive.