Automatic lights

[jj gts]

Hi
I have installed in my vectra c the light and rain sensor with the remote control. But I can't activate it with tech2. I get the message in the image
I also put a photo of the connection in case it were that
Thank you
Screenshot_20201202-232814_WhatsApp.jpg
Screenshot_20201202-232835_WhatsApp.jpg
This is the translation: This parameter is fixed and cannot be modified

[GSiFan]

You need a Tech2 expert to help here. @plasma @jon1.9cdti

Paul

[jj gts]

[QUOTE = GSiFan; 2529208] Necesita un experto en Tech2 para ayudarlo. @ plasma @ jon1.9cdti

Paul [/ QUOTE]
Thank you

[plasma]

try changing the vin number on the BCM to one from a later vehicle. If that fails to work, then you should purchase a later BCM

or

You can try opcom/vauxcom on the bcm to get around the issue

[jj gts]

[QUOTE = plasma; 2529217] intente cambiar el número de vin en el BCM a uno de un vehículo posterior. Si eso no funciona, entonces debe comprar un BCM posterior

o

puede probar opcom / vauxcom en el bcm para solucionar el problema [/ QUOTE]
Change bcm for a later one and it still doesn't work

[Dog_Book]

Hold on, that’s an EX sensor which is only used in the face lifts. The first ones needed a different type didn’t they and the connector was also different.

[jj gts]

[QUOTE = Dog_Book; 2529226] Espera, ese es un sensor EX que solo se usa en los estiramientos faciales. Los primeros necesitaban un tipo diferente, ¿no es así? Y el conector también era diferente. [/ QUOTE]
Sí, el conector como se ve en las fotos es diferente y lo adapt

[jj gts]

este es el bcm Screenshot_20201207-172829_Gallery.jpg

[sulten]

Is this your original BCM? I think this is a facelift BCM, so select MY2006 and try programming with your WIN

[jj gts]

It is a bcm of a 2006 vectra that I have put
The MY2006 is the model that I have to put in the tech2?
And the WIN is the chassis number ? The serial number of the car?