Tunit V-VP installation manual

[northpole]

Anybody got one of these kicking about? I got a used one at a good price bit this is the one with the older style hardwire kit... I found out what plus and minis are... but that is about it... I know one should go to MAF and one towards the fuelpump but not sure what is what or where to connect them so any help would be awesome...

Ow don't mention contacting the seller or the company as the seller doesn't have it or any pictures and the company wants 60 pounds for the manual... its 6 wires in total 2 of which I already sussed out.. so not paying 60 pounds for 4 wires the ****** cheek!

[northpole]

is there anyone that has the complete diagram of the pinouts on the psg16 vp44 bosh ECU? actually to be more precise, i need the following:
- the pin number and wire colour for the throttle position sensor
- the pin number and wire colour for the fuel injection pump...
like i said i found the rest of the wiring and that isn't a problem just don't know what the pins are for those on the ecu otherwise it would be connected up already...

if anyone can help me out with this than i won't need to contact the manufacturer of the tuningbox.

[northpole]

Right after some help from @Dog_Book I found the right pin outs on the ECU... o than gathered I might aswell try the seller who actually list send me the installation manual straight away! Were very helpful basically said if it is acting up I can contact them and they'll recalibrate it free of charge.. of it needs parts replacing that is when they'll contact me and let me know what it's going to cost etc...


Now in the manual they implicitly warn you not to install the hardwired kit anywhere near the ecu... but point out the exact location and colour wires to where you should tab into the existing wiring...


But to do so I will need to remove some stuff and today isn't going to be that day... so I will be doing it when I don't need to go anywhere for a whole day...

Just incase I manage to break something as the more is quite a lot in the way of some of the wires...

But this can be closed