Replacement roof ribbon and lining now rear light wont fit back into roof

[yamman]

these are the plugs i used for rear of led in handles for easy future removal as copied from woody and plasma. I want the lights in last pic to be bright white but need some advice on where to link into what colour wires on doors to make each light come on only when that door is opened hooefully plasma or another member will help with this when that time comes20200117_104924 (Small).jpg20200117_104948 (Small).jpg20200117_104930 (Small).jpg20200117_105008 (Small).jpg

[yamman]

Figured there's a clip on the light unit to hold it in place must of lost mine and the replacement 1. Double sided tape working well

[NielsJ]

these are the plugs i used for rear of led in handles for easy future removal as copied from woody and plasma. I want the lights in last pic to be bright white but need some advice on where to link into what colour wires on doors to make each light come on only when that door is opened hooefully plasma or another member will help with this when that time comes 20200117_105008 (Small).jpg

Cool, thanks! Are the square lights OEM ?

[yamman]

Yes they are oem taking from glove boxes and boot I plan on using led festoon bulbs in them but still gotta get them wired in yet. Not sure where to take power from so each 1 lights up only when that door opens. Sure there will be wires I can link into on doors but until I find it or someone on here can confirm which ones they are on hold and not wired up. The led in handles I think are too big I got large ones should of went with 3 or 5 mm. Lights bouncing up off handles onto roof a bit too much for my taste but easily controlled with the dimmer switch