What psi are people running in there 20 turbo z20net
Sent from my iPhone using Tapatalk
What psi are people running in there 20 turbo z20net
Sent from my iPhone using Tapatalk
Depends entirely on the turbo fitted as to what the map can be tweaked to. The early Z20NET's had the Garret 2052 low pressure turbo fitted which will crap its pants at over about 10 or 11psi (about 0.6 bar ish). The later ones had the TD0411T fitted as standard which will cope with a bit more.
If you're thinking of running the stage 3 or higher map then you should look at the TD04L14T turbo. I was running 1.4 bar on mine (about 20psi ish) and it would hold 1.3 to 1.4 bar right the way through the gears.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
I would tell you how much boost my tuned Z20NET is running, but Ian H ^^^ fitted my boost gauge and now all it tells me is the time in Kazakhstan and the UV index for Western Australia.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
Was running the std Vaux map when I got it, 8psi ish.
Had the std Saab map put on and now running around 15psi
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks