Vauxhall Vectra Sri cdti 1.9 issue

[Curtnis]

Hello, sorry I'm new here and looking to shed some light on an issue I have.

I've noticed a loose pipe leaking gases but unsure of what it is and how to fix, have attached the pics of it if anyone could help would be much appreciated, thanks ��

(The pipe with my hand on is the pipe in question)

Thanks in advance.

[LastOne]

I'm no expert on those Fiat engines, but that looks like it's EGR valve related.

[paula9568]

its the pipe to oil catch tank its suspose to be a bit loose like that to stop pressure buld up

[Dog_Book]

Both incorrect, will answer properly once home from work

[LastOne]

Both incorrect, will answer properly once home from work

Well that non-answer is even worse than a wrong answer

[Dog_Book]

Well that non-answer is even worse than a wrong answer

[Curtnis]

Thanks for the replys. Also a bit off topic from my OP but is there anywhere anyone could recommend to fit a new inlet manifold and swirl flap delete also a remap for an egr delete, and what sort of price would I be looking at for this work. Cheers.

Sent from my COR-L29 using Tapatalk

[Dog_Book]

Its the breather pipe from the oil separator and it's not supposed to vent to air as its a closed loop system, if you follow it you'll see it goes into the intake before the turbo inlet.
It has a quick connector i think its called use them on pipes like push fit ones, i had one which went loose so would emit vapour. There is a newer version pn 55217795, so if your changing the manifold its all got to come off anyway id get the new version with a fixed pipe outlet then its sealed using a traditional hose clamp. https://opel.7zap.com/en/car/z02/e/11/12-0/#6
You'll need the newer pipe too pn 55207543

[justin32]

ive got a spare pipe here if your interested. drop me a message if your interested