Vectra 1.9CDTI 150 SRI AUTO - EDC15C39 - .kp file?

[Curtislee19941]

Hey guys.

Ive made a few posts here regarding my old 1.9 that sadly is now once again blown up by the new owner and his petrol driving habits...

But I've now got my hands on a lovely 1.9CDTI 150 SRI XP PLUS

I was going to use my old file but noticed it has the dreaded C39 ECU.

Does anyone here perhaps have a .KP file i could use for Winols as i only have one for the C9 variant.

Any help would be appreciated!

Also can i assume i can map the auto the same as my old manual as she produced some good power!

And here she is:

57447261_2328229140798108_2340116302774927360_o.jpg

Also when i get around to it i will upload my older C9 files here for people to use or learn from etc.

Thank you

[nutron]

It will kick down a lot and waste all the torque unfortunately but yes, the auto box will take 380lbft and 230bhp happily.

[Curtislee19941]

It will kick down a lot and waste all the torque unfortunately but yes, the auto box will take 380lbft and 230bhp happily.

Not bad at all for an auto box then really! Hate it thou, Cant wait to get a donor car hoping to convert her to a manual!

[nikroc]

When you say 'donor'car...what car ?..curiuos.

[Curtislee19941]

When you say 'donor'car...what car ?..curiuos.

A 1.9 CDTI 150 Manual

[Teapot]

It will kick down a lot and waste all the torque unfortunately but yes, the auto box will take 380lbft and 230bhp happily.

You can use the low-end torque if you put it into manual mode by pushing the shift selector to the left.

[nutron]

Wasn't able to on the one I did.