Part Number Required For EGR to Exhaust Gasket

[jingerman]

Hi, I recently took out egr from 1.9cdti 8v 120bhp 2005 vectra and I also removed Egr to Exhaust pipe to clean.

There is a round gasket that fits the pipe to exhaust which unfortunately I dropped whilst putting the pipe back.

It fell towards my starter motor and may have lodged itself there or fallen down to under-tray.

Anyway dont really want to get the jack out and open under tray.

Does anyone know the part number or exact name so I can look online.

P.S The egr is fully working no eml lights or car/spanner, so can I possibly just leave it?

Thanks in advance.

[Johnsdutton]

Have a look here

http://ecat24.com/opel/catalog/vinsearch

[jingerman]

Found the cooling pipe and it showed gasket ring but not highlighted.

number 18

http://ecat24.com/opel/catalog/part/...1/41397,41381/

Looks like it comes with full pipe.

Looks like I'll have to jack up car and remove the under tray and hopefully it's fallen there.

[Johnsdutton]

Try in here .
vauxhall.7zap.com/en/car/z03/g/0/76-1/

[jingerman]

No joy, thanks. It's working fine without it and not showing any warning lights.

I get National to keep anything lying on the undertray when it goes in for oil change in May. Fingers crossed