Had the car for 10 years, and done loads, but not done a diary.
So I'll start with today and work backwards
Maybe.
Had the car for 10 years, and done loads, but not done a diary.
So I'll start with today and work backwards
Maybe.
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
Latest pic:
WP_20180831_10_23_06_Pro_LI.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
Anyway.
Today's "quick" mod - puddle lights.
Got these BMW replacement LED ones.
WP_20181125_19_56_06_Pro.jpg
Fashioned a connector for the pins and wired them.
WP_20181125_12_56_32_Pro.jpg
WP_20181125_12_55_08_Pro.jpg
WP_20181125_15_09_20_Pro.jpg
WP_20181125_15_09_47_Pro.jpg
Followed the How To here.
Connected them to my existing footwell lighting.
Used 5A wire so had to drill 2 holes.
Damaged the door connector and struggled getting it back together.
But it's all working now:
WP_20181125_18_09_42_Pro.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
That’s smart! I like that, never thought about the big gap behind the door cards
Sent from my iPhone using Tapatalk
i like it! and it looks like it was always there... you Sir did the car proud!
Had the problem with the corroded earth on the rear lights.
Cleaned the contacts up, replaced some bulbs for "better" ones.
Then thought I'd give the lenses some love.
Polished them with Plastrx - very shiny now.
Also replaced the black trim on one side for an unmarked one I had lying around.
WP_20181130_14_18_23_Pro.jpg.
WP_20181130_14_34_37_Pro.jpg
WP_20181130_18_29_39_Pro.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
Had some badly scratched genuine signum door sill protectors hanging around.
Refurb'd them in matt black.
In the right light you can still see that they have SIGNUM etched in
Much better!
WP_20190201_16_26_41_Pro.jpg
WP_20190201_16_46_47_Pro.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
Gearbox rebuild completed (not by me). Picked the car back up a few days ago - it's running lovely.
Today I replaced the standard transmission oil with a higher spec:
WP_20190204_14_03_44_Pro s.jpg
While I was at it, replaced the battery box with an unbroken one and secured it with 3 new bolts.
WP_20190204_14_33_05_Pro s.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
I had a period trying out DRLs in place of the fog lights. Cut them into blank inserts.
WP_20170924_18_50_57_Rich afl.jpg
Was also trying out the look of my black AFLs courtesy @new boy
Still not fitted after a year and a half.
Painted the original chrome fog surrounds black and refitted with nice yellow bulbs.
Was going to go HID, but changed my mind. Like a crisp yellow fog light anyway.
WP_20190113_10_17_21_Pro.jpg
WP_20190209_16_07_43_Pro.jpg
WP_20190209_16_12_32_Pro.jpg
While the bumper was off, re-glued one parking sensor bracket
WP_20190209_12_25_17_Pro.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
Need some long shots to fully appreciate the car like this.
IMG_1354.jpg
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
There are currently 3 users browsing this thread. (0 members and 3 guests)
Bookmarks