Z30DT spanner warning light

[megyocon]

Hi all,

I need some advice:

After turning the key to ignition, the spanner warning light flashes 5 times (only this flashes, not more). What does it mean?
Based on the manual this light could mean two things:
1. On ignititon, it illuminates - that means that the preheating system is active.
2. During the engine is running, when it flashes continuously - that means that the automatic dpf cleaning cannot operate automatically.

But what does that mean when it flashes 5 times on ignition and during the engine’s running there’s nothing?

Infos:
- Based on opcom data, the dpf is on 200% fulfillment.
- Last weekend I went a long trip with 85 mph for 2 hours (Z30DT Automatic in 6th gear), but the automatic cleaning didn’t start.
- There’s no hole in hose pipe.
- There’s no error codes, checked by opcom.

thanks,

[JunckMAn]

It is too filled to regen.

[megyocon]

It is too filled to regen.

What can I do?

[NickT]

Force a regeneration via opcom (if you can! ) then take it for a good drive in a low gear and high revs etc.

[megyocon]

Force a regeneration via opcom (if you can! ) then take it for a good drive in a low gear and high revs etc.

Thanks, opcom cannot do regeneration in Z30DT, so I will take a ride.