Vectra C door module types

[paulthomas12]

Hello.

I have an EP & EQ DDM/PDM.
I would like to fold my mirrors with the key, is it possible with these modules?

Any Tech2 programming needed to do it?

Thanks!

[Woody]

@plasma ?

I suggested the OP asked this. My own car folds unfolds fine via the key buttons, but his doesn't ?

[Dog_Book]

Maybe it doesn’t have powerfold mirrors?

[paulthomas12]

Maybe it doesn’t have powerfold mirrors?

I have and in that car which they are from it doesn't worked with key, only with the door switch.

Are there any difference between the mirrors maybe?
Or it just a Tech2 programming to do the folding with keys?

Thanks

[northpole]

in my experience if it folds on the door switch it can be programmed to also do the same via the keys... so probably via Tech2 or op-com/vaux-com

[paulthomas12]

in my experience if it folds on the door switch it can be programmed to also do the same via the keys... so probably via Tech2 or op-com/vaux-com

Yeah I believe in it too.

Maybe anyone knows in which menu I can program the key features?

[RBH]

Can we establish if your car originally have powerfold mirrors fitted???

Or was it standard mirrors?

[paulthomas12]

Can we establish if your car originally have powerfold mirrors fitted???

Or was it standard mirrors?

My car has standard electric mirror without folding and I don't have a PDM in the car yet.
But i have a conplete kit from another car.

[paulthomas12]

Can we establish if your car originally have powerfold mirrors fitted???

Or was it standard mirrors?

My car has standard electric mirror without folding and I don't have a PDM in the car yet.
But i have a conplete kit from another car.

[plasma]

it all down to the door modules, either they support folding off the key or they dont, there is no special option for it other than the power fold in the config, and if you mirrors fold in off the switch then its already set.