-
Regular Member
weird noise - 2.8 V6 behind glovebox
What's behind the glove box folks?
I'm getting what can only be described as a random clicking noise.
It's intermittent; pretty loud and will give half a dozen click clicks / knocks before stopping.
Doesn't appear to be a vibration as it can happen when stationary.
Any thoughts?
-
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
-
Regular Member
your sarcasm gets better with age lol
Mind you, you're quite right - if I'd searched properly instead of miss-spelling things then I may have found the thread about the heater / recirc issues
Cheers
-
Originally Posted by
stripey
your sarcasm gets better with age lol
Mind you, you're quite right - if I'd searched properly instead of miss-spelling things then I may have found the thread about the heater / recirc issues
Cheers
Not sarcastic at all, that section is where I’ve read solutions to the various issues with the climate systems. Despite the amount of issues I’ve come across on the 2 Vectra’s I’ve owned so far I’ve not been plagued by this, yet.... so as such I can’t give first hand advice.
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
-
I can give first hand advice, as the one on the show car finally failed lol probably due to lack of use more than too much use...
I removed glovebox and side panel by the heater to gain access.. mine was the hot/cold mixer servo which failed.
Plasma's Tech2 services are now open and able to provide services
-
Regular Member
@Dog_Book gave me a good steer . Noise comes back when I press the recirc button and I've located the new part for £59 so looks like I'll be struggling with my driver when it arrives
Originally Posted by
plasma
I can give first hand advice, as the one on the show car finally failed lol
probably due to lack of use more than too much use...
I removed glovebox and side panel by the heater to gain access.. mine was the hot/cold mixer servo which failed.
-
Post Thanks / Like - 0 Thanks, 1 Likes
Bookmarks