VXR spoiler fitting

[Inovator]

Any recomendations for fitting VXR boot spoiler (without bolts). Glue or silicon?

[RBH]

Sikaflex
Tigerseal
Omniseal

All basically the same stuff.....but the spoiler will never move.

[Woody]

Definitely NOT glue or silicone.

As above

HTH

Woody

[Kornowski]

I've previously used silicone on a small SRI lip spoiler, and tigerseal on the VXR boot lid spoiler. Both worked well; but I'd use the tigerseal again for peace of mind knowing that once it's stuck down, it will not budge!

[brifen]

Yup, as others have said Sikaflex or Tigerseal is the stuff to use.

[Steel]

I fitted one to mine this week, cleaned out the channels where the original sikaflex and put a bead in each and used 9mm double sided tape around the edges as per original, solid as a rock!
IMG_0081.jpg