... and that makes the car rather annoying to drive.
I have a slight issue; my left (driver's side here in continental Europe) wing mirror won't fold out anymore! It's now stuck in the folded position.
My Vec C2 has power folding mirrors, and normally they extend at the push of a button on the key fob, or on the 4-way key in the driver's door. The right mirror still works, and folds in and out, but the left one refuses to budge.
OpCom gives an error in the Driver Door Module, in that the Power Folding Switch Circuit malfunctioned, so my first suspect was the door switch cluster. I opened it up, cleaned it a bit > no. The 4-way key still works to adjust the angle of the mirrors, and the right (passenger's side) mirror still folds in and out.
What I've already tried:
- Opened up and cleaned the driver door switch cluster.
- Used Opcom to reset any errors. Error immediately returns.
- Opened up the mirror, and cleaned the contacts of the motor of the folding mechanism.
- Had the car off of the battery for 30 minutes, hoping this would reset all the CANbus computers and hopefully clear this error.
None of that worked. Short of booking it in to my Local Friendly Opel Dealership where I'm sure they can fix it in exchange for a sizable amount of currency, is there anything else I can try/test?
Bookmarks