-
19th August 2017, 14:34
#1
CDC Module for Signum 2.8T
I'm getting one of Teapot's maps for the 2.8T.
I'd really like to get the sport button and CDC set-up to run 2 maps - the mental one, and a round town one.
There appear to be 2 types of CDC module, one of which is for the VXR.
Does anyone know, if I'm just wanting the set up to be able to switch maps, does it matter which CDC module I use?
I need some fuel economy to justify the big power.
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
-
19th August 2017, 15:22
#2
don't know what car my CDC came from, no-one asked when it was supplied, and it works fine.
@plasma may have an inkling.
because........SIGNUM!
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
19th August 2017, 17:27
#3
Makes no difference which one you use as they all do the same thing ,
I used a vxr one in my old 1.9 cdti and then it was later fitted to a 3.2 v6 .
Have also fitted one from a 3.2 v6 into a 2.8 v6with no problems whatsoever
Custom griill, Vx-line bodykit ,gsi boot spoiler, Irmscher evo star 20" alloys , Stainless twin exit exhaust
-
Post Thanks / Like - 1 Thanks, 2 Likes
-
21st August 2017, 10:49
#4
Originally Posted by
jon1.9cdti
Makes no difference which one you use as they all do the same thing ,
I used a vxr one in my old 1.9 cdti and then it was later fitted to a 3.2 v6 .
Have also fitted one from a 3.2 v6 into a 2.8 v6with no problems whatsoever
Does the module have to be reset, or come with the code?
Think I know the answer.
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
-
21st August 2017, 12:48
#5
Originally Posted by
watchman
Does the module have to be reset, or come with the code?
Think I know the answer.
Iirc No code needed , the cdc module does not form part of the immobiliser and as such is not coded to the car
Custom griill, Vx-line bodykit ,gsi boot spoiler, Irmscher evo star 20" alloys , Stainless twin exit exhaust
-
Post Thanks / Like - 1 Thanks, 0 Likes
-
21st August 2017, 13:31
#6
Thanks for that.
Good job. I've just bought one
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
-
3rd November 2017, 09:59
#7
Got the thing set up, with @plasma loom and excellent instructions.
Already had the wiring from the BCM and behind the Sport Switch, which was nice.
Applied the @Teapot dual map thing yesterday, after a lot of faffing on my part.
Did a test run from Leeds to Manchester (and back). Economy on the way there through the rush hour; Sporty on the way back - took it steady though.
Results are impressive. I'm amazed anyway :
WP_20171102_16_53_17_Rich.jpg
WP_20171102_20_48_11_Rich.jpg
2006 Signum Design 2.8T
Teapot TUNED, Memory mirrors, Eibach/Bilstein, Roof rails, XP2 front end
IDS+ (removed), Multi-contour memory front seats
-
Post Thanks / Like - 1 Thanks, 2 Likes
-
3rd November 2017, 12:09
#8
Going to be doing some more R&D on mine soon so will have this upgrade as part of the pack
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
-
Post Thanks / Like - 0 Thanks, 1 Likes
Bookmarks