Amazing! This is for my passenger dimming mirror that @Sebastian supplied
All good!
IMG_2836.jpg
Amazing! This is for my passenger dimming mirror that @Sebastian supplied
All good!
IMG_2836.jpg
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
Very tidy indeed. Dean supplied me with the body loom for rear electric windows a few weeks ago and was very very well made, so well made indeed that I haven't fitted it as I can't stop looking at it lol
Clive
Dean knows his stuff when it comes to wiring looms. He did my heated seats loom and it looks factory. Also he is a very decent guy
Check HERE for upcoming meets/events
I've taught him well lol
He has done most off my retro wiring /fitting .
Can't recommend him enough .
I did this job the other day, took about 30 photos so wont upload on the forum but ill give you an idea. I even drilled the mirror plug rivets of enough for me to unclip it then glue it back so its all factory fit. I spliced the loom close to the REC but i bet i could have found it somewhere near the X2 plug in the passenger footwell. My fault really i should have reminded Dean i already have the driver dimming mirror working and in but if the loom goes somewhere else then it still need to go to the back.
But yeah, it was a pleasure to fit as even though hard to get into every plug as i don't do this everyday once done it was so neat and you'd never tell really. The instructions are fool proof really, i could have just had the simple wires and worked out which plug and hole in them to use so anyone not so used to working these out would find them really good.
TBH if Dean had charged me 3 times the amount i would have still gotten a good deal in my eyes and i would have been happy to pay it given what i was sent.
IMG_3024.jpgIMG_3030.jpgIMG_3038.jpgIMG_3035.jpgIMG_3053.jpgIMG_3054.jpgIMG_3057.jpgIMG_3059.jpgIMG_3050.jpg
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
And again great service and looms for the additional fog light and power seats upgrade for the vxr.
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
Dean’s wiring and looms are second to none, He’s done loads on my car and everything has always worked first time every time. Just waiting to fit the power tailgate now
And again an amazing kit (electric seats no memory) so easy to wire up, it took longer to strip the car out and clean everything before the new power seats went back in. Very cheap to!
IMG_4273.jpgIMG_4283.jpgIMG_4287.jpgIMG_4285.jpgIMG_4289.jpgIMG_4290.jpgIMG_4291.jpg
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
Nice tidy install you did there You even did a past and back loop on the earth stud
Plasma's Tech2 services are now open and able to provide services
If your going to use a first class wiring kit you might as well do a first class job of it, theres loads more photos. Everything was taped down like factory and tie wraps reinstated where i had to cut one off at the X2 plug is it for passenger foot well mainly cos of the foot well lighting.
I hoovered the inside out about 6 times during the whole process lol
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks