-
New Member
Originally Posted by
Drogen24
Sorry to necro this old thread again. Does anyone know if an f40 from a pre-facelift 150 will fit a facelift 120? I've found a potential donor car that I can get all the required parts from for much cheaper than an M32 alone.
Can anyone confirm the latest post about the flywheel being the same or will I need a Z19DTH flywheel?
Preface F40 will fit, but it's better to find as much newer(less km) as possible from last facelifts, because F40 has wear issues with input shaft bearings.
Flywheel is related to engine model(not clutch/gearbox) keep 8v one, if you want to put new, has to be again for 8v engine.
-
23rd September 2022, 14:03
#62
Regular Member
Hi folks.I have an insignia mk11.8 and interested in swapping m32 to f40 box. Which box will work as per ratios. Anything needed to swap? Many thanks
-
23rd September 2022, 15:24
#63
Originally Posted by
pauluk49
Hi folks.I have an insignia mk11.8 and interested in swapping m32 to f40 box. Which box will work as per ratios. Anything needed to swap? Many thanks
you might want to post this in the Insignia section mate
-
Post Thanks / Like - 0 Thanks, 1 Likes
Bookmarks