CD70 Bluetooth Cradle

[leeds vectra]

All,

Just thought I would post up regarding the factory fit bluetooth system. The cradle which replaces the cup holder doesn't really serve any purpose other than to charge the phone and give it an external aerial.

There are only certain phones that are fitable to it anyway which my Motorola isn't. I have deicided to remove it and fit the traditional cup holders with drawer top.

Easy job to do, undo the two torx screws at the bottom of the cradle, unclip the trim that it is mounted on, remove the wires from the cradle and leave them in the car in the void. Replace with cup holder and draw over top. This all just clips in with no screws required.

Job done.


The parts required for the cup holder are as below.

[Flaninacupboard]

Have you added the bluetooth kit yourself or was it factory fit mate? this is another mod i'm interested in!

[stripey]

Have you added the bluetooth kit yourself or was it factory fit mate? this is another mod i'm interested in!

ditto

[Bainie]

Do you have the part numbers for the holder bits, this is a mod for me defo ... (and I wasn`t going to mod it *lol*)