Fitting Front Bumper Spoiler ???

**ROY2593** · 21st March 2007, 19:08

Hello Guys,

ADVICE NEEDED PLEASE....

My x pack front bumper lower spoiler for my face lift has arrived today at my dealer and i have taken it to be painted,should be ready on Friday.

Can someone tell me how they fitted their front bumper spoiler ??
I see that it has double sided tape around the edge and a screw at the ends going into the inner wheel arch.

My main concern is, how do you get it level first time as i think you only have one chance to fit it????

Thanks,

ROY.

**m20_swe** · 21st March 2007, 19:11

a fitted on to a pre face lift the other day and there was a slot on the bumper so there was on one place it could go should be the same on the face lift

**Caterman** · 21st March 2007, 19:59

Originally Posted by marty150cdti

a fitted on to a pre face lift the other day and there was a slot on the bumper so there was on one place it could go should be the same on the face lift

Nope, totally different on the facelift. The splitters are bonded on only. No clips, no slots, NOWT!!! Best of luck m8

Get a body shop to do it for you would be the best advice.

**leeds vectra** · 21st March 2007, 20:03

I got ourlass out in to the garage to help with mine, not pleased covered in black bonding!

**Silver V** · 21st March 2007, 20:18

is there a how to? for the PRE? cos mine is sprayed just needs fitting

**jamesy** · 22nd March 2007, 00:47

just 8 bolts underneath mate i was told when i had mine done - easiest way is to get it on a ramp then its a 10 min job...

**Gsi3.2** · 22nd March 2007, 07:52

it would be if Roy had the same car as you mate..

...

he's got a facelift.. and as Caterman say's, it's bonded on..so it's out with the silkaflex and wide masking tape for Roy..

**ROY2593** · 22nd March 2007, 09:22

Thanks for the replies guys,i think its going to be very stressful !!

Roy.

**jamesy** · 22nd March 2007, 10:14

Originally Posted by Gsi3.2

it would be if Roy had the same car as you mate..

...

he's got a facelift.. and as Caterman say's, it's bonded on..so it's out with the silkaflex and wide masking tape for Roy..

DOH!

thats the 2nd time i've done that - must read the questions more bvefore typing!!

**nutron** · 22nd March 2007, 11:14

I sloted mine in, drilled some holes and used some fasteners from Halfords (plastic body with a screw down the middle to push the sides out and grip, like the things you use in walls, rawl plugs or something).