-
15th September 2014, 20:46
#31
Originally Posted by
brasch
this isn't quite right.
The current setting of the drivers seat (not sure about mirrors, but most likely) is stored to the key locking the car. And then returning to this position when unlocking the car with the same key (if another key has been used to lock the car with other settings. These are independant from the memory button settings
@brasch
You are right
Store and activate the settings using the
remote controls
When the vehicle is locked with the radio
frequency remote control, the current
positions of the driver’s seat, the exterior
mirrors and the interior mirror are stored.
Personal settings stored using different
radio frequency remote controls can be
retrieved as follows: open driver’s door
within one minute of unlocking and the
positions stored using the radio frequency
remote control are automatically set.
-
16th September 2014, 06:52
#32
Originally Posted by
Hummelshøj
@
brasch
You are right
Store and activate the settings using the
remote controls
When the vehicle is locked with the radio
frequency remote control, the current
positions of the driver’s seat, the exterior
mirrors and the interior mirror are stored.
Personal settings stored using different
radio frequency remote controls can be
retrieved as follows: open driver’s door
within one minute of unlocking and the
positions stored using the radio frequency
remote control are automatically set.
I'm pretty sure the climate settings are stored as well. I would think that the radio station is as well, but I can't really test that without OE head unit
-
17th September 2014, 19:37
#33
-
Regular Member
Thank you
Just wanted to pass on my gratitude to the original thread starter and those who contributed to this thread. Armed with this knowledge i now have working electric seats in my car
For the benefit of other searching for info, the wiring is as follows;
Power;
Drivers seat
REC XR3 4 to 37 seat plug
Passenger;
REC XR3 6 to 37 seat plug
Earth;
Driver
Drivers footwell earth point to 38 seat plug
Passenger
Passengers footwell earth point to 38 seat plug
Canbus connection for the memory is either 23 or 25 in the seat plug to the green wire running up the sill on the drivers side.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
well done now all you need to do now is do the passenger one to full memory also
-
Regular Member
-
14th June 2021, 20:57
#37
New Member
Originally Posted by
Damwee
Just wanted to pass on my gratitude to the original thread starter and those who contributed to this thread. Armed with this knowledge i now have working electric seats in my car
For the benefit of other searching for info, the wiring is as follows;
Power;
Drivers seat
REC XR3 4 to 37 seat plug
Passenger;
REC XR3 6 to 37 seat plug
Earth;
Driver
Drivers footwell earth point to 38 seat plug
Passenger
Passengers footwell earth point to 38 seat plug
Canbus connection for the memory is either 23 or 25 in the seat plug to the green wire running up the sill on the drivers side.
Gratitude to original thread starter and all others. I have electric heated recaros in my vectra and i want to convert them to memory. If I understood correctly i just need to splice into green canbus wire for memory function?
I have already factory fited powerfold mirrors and i want convert them to full memory with interior memory dim mirrors. What wires do i need to add to have that functionality? One more thing, the donor seat have cooling option, will that be plugnplay without any wires added?
Poslano sa mog M2007J3SG koristeći Tapatalk
Bookmarks