-
29th November 2018, 21:52
#9881
Ordered 2 stainless bellows for the exhaust manifold to turbo repairs and another fog light with the same Valeo numbering as the one i fitted the other week as i noticed it has a proper pattern IE can be aimed down with more of a straight line of light whereas the other seems to spread the light up and around even though its adjustable.
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
-
29th November 2018, 23:04
#9882
Fixed a c0035-06 fault code. Front left abs sensor voltage low or non existent. Fault was a break in the wiring in the car harness 8 cm from the multi plug connector in the when arch. At least it was free to fix. All soldered up and heat shrink with looming tape for water tightness.
-
Post Thanks / Like - 0 Thanks, 1 Likes
-
1st December 2018, 20:47
#9883
Vectra VXR estate 2007 Sapphire Black
Teapot Tuned 255/300
Eibachs B8's, fully loaded factory options
Tech2 & MDI diagnostics + SPS
-
Post Thanks / Like - 0 Thanks, 4 Likes
-
4th December 2018, 17:14
#9884
Did a bit more stripping on the breaker.
20181204_140548.jpg
20181204_140605.jpg
20181204_141432.jpg
Headlining and pillar trims etc out door cards out front and rear speakers out
-
Post Thanks / Like - 0 Thanks, 2 Likes
-
4th December 2018, 19:22
#9885
ignored it for 11 days whilst in Egypt.
clearly wasn't happy, decided to flatten it's own battery!
because........SIGNUM!
-
Post Thanks / Like - 0 Thanks, 3 Likes
-
4th December 2018, 20:08
#9886
Brought it in for it's MOT and it passed! Just one advisory and it is just a droplink that needs changing...
-
5th December 2018, 17:57
#9887
Regular Member
Put some sound deadening and insulation in the trunk and lid. New sub as well, all on a tight budget.
Deadening and insulation 70£
Sub and amp 200£
Trunk is now silent, no noise coming from the back other than the sub
The 20mm Insulation made the install a really tight fit.
here's some poor quality photos, i have changed some things after these pictures
Learned that 10" subs look really tiny in the back of a vectra
IMG_20181201_202750.jpg
IMG_20181204_200129.jpg
IMG_20181202_114726.jpg
IMG_20181202_125310.jpg
Last edited by marius25; 5th December 2018 at 18:10.
-
Post Thanks / Like - 0 Thanks, 4 Likes
-
5th December 2018, 20:07
#9888
Originally Posted by
marius25
Put some sound deadening and insulation in the trunk and lid. New sub as well, all on a tight budget.
Deadening and insulation 70£
Sub and amp 200£
Trunk is now silent, no noise coming from the back other than the sub
The 20mm Insulation made the install a really tight fit.
here's some poor quality photos, i have changed some things after these pictures
Learned that 10" subs look really tiny in the back of a vectra
IMG_20181201_202750.jpg
IMG_20181204_200129.jpg
IMG_20181202_114726.jpg
IMG_20181202_125310.jpg
At least you got space left, I have a saloon with 2 12 inch subs in the boot.... half of it is gone but I really should built them into one custom fit box... that would give me more space... it'll be one of my projects next year.
-
6th December 2018, 17:02
#9889
Fitted a new coil pack courtesy of one of ecp's perpetual offers. The engine sounds noticeably smoother and quieter, and pick up is much improved.
But the idle is still a bit rough....sigh.
-
6th December 2018, 22:10
#9890
New Member
Replaced the rear headrests with identical front ones, and also changed over my cloth centre armrest for a nice black leather one.
Bookmarks