pics:
pics:
Had to take the valve cover off because one corner was leaky. While i was there i rethreaded 3 holes just to be sure. So far so good, nothing is leaking.
And that's still leaking, replaced the gasket, same story. Now i am thinking of using rtv on top of the gasket but i am not sure that will fix it... the surface is not dinged or anything, maybe the valve cover is out of shape but i doubt.
Also found a "small" brake booster vacuum leak.
PS: a valve cover bolt has fallen into the engine bay, it's a gonner and of course it's out of production and i can't buy a new one nor junkyard
Finally sorted my ravaged and tatty knob out - too much handling over the years had taken its toll
Last weekends work was (9h)
* suspension change to Bilstein/Eibach B12 Pro
* wishbones to Meyle HD with Powerflex bushings
* new strut bearings
* new steering arms
* all rear suspension parts new
* set of new winter tyres
* computer alignment
* new battery
* changed interior air filter
* de-programmed the autolight switch
Road response is great, cornering speed increased - possibly resulting in more speedcam snaps - i will report.
Greets Andre
Do powerflex bushes squeek?
Meanwhile signumareasa helped us to move from the flat we used to own. Good gal, lots of space but nothing compared to astra caravan
PS: a wheel cap went flying to oblivion, nowhere to be found; also ordered a PCV valve from poland since it's out of production. Cheapest set by far, only 60 euros(shipping included) for 2 gaskets and once pcv.
IMG_7281.jpg
IMG_7297.jpg
IMG_7305.jpg
IMG_7383.jpg
WhatsApp Image 2024-11-14 at 14.27.40.jpg
One tiny weld(this area of forum wasn't accesible for some time)
IMG_7422.jpg
disassembling the trunk and 3h of vacuuming the trunk and inner trunk lid.
ask why? lost 2 litres of washing liquid in the trunk that spilled right in the trunk lid...
worst thing of all - i wasn't my favourite flavour , the whole car stinks like lavender heaven ...
There are currently 15 users browsing this thread. (0 members and 15 guests)
Bookmarks