Will these fit my car

**thestaffy** · 18th February 2007, 22:32

As above as i think this is such a bargin
http://cgi.ebay.co.uk/18-Kahn-style-...QQcmdZViewItem

**Harry** · 18th February 2007, 22:34

nice wheel, is it similar to the ones that Caterman had on his Vec?

have you asked him what offset and PCD they are as i didn't see it mentioned in the ad

**Duncan** · 18th February 2007, 22:34

I think they will. With the PCD being 108 you'll need wobbly bolts, but you'll need to find out what offset they are.

Harry, I think what they refer to as Stud Diameter is the PCD.

D

**Gsi3.2** · 18th February 2007, 22:35

at 108 they will need 'wobbly' bolts to fit on, and the 40ET is okay, but 38 is better...

no size of hub bore listed thou, so it may need boring. or having a collar fitted..

**Gsi3.2** · 18th February 2007, 22:35

3 replies in 60 seconds...god, we're on form today..

**veccy22** · 18th February 2007, 22:36

thought they had to be 110 and between 35 -49 offset !?

**Caterman** · 18th February 2007, 22:36

They are 108mm PCD and might fit with wobbly bolts. It depends on the centre hub size too m8.

Yes Harry, the TSW Warriors i had on my old vec were very similar to the Kahns.

**veccy22** · 18th February 2007, 22:37

sure are ! but some of us can type quicker !!! lol

**Duncan** · 18th February 2007, 22:38

Originally Posted by veccy22

thought they had to be 110 and between 35 -49 offset !?

110 is what is needed to fit without wobbly bolts. Up to 108 and 112 and you can fit wobbly bolts.

Mark, the ad hasn't given an offset. I mis-read the aspect ratio as being the offset

,, so edited my post - which you may have based your reply on?

D