Q for wheel experts:)

**dibar74** · 28th April 2013, 12:38

Is it possible to fit original Ford aluminium wheel to my -08 veccy? Ok, I need wobbly bolts? The hole needs to be machined to 65,1mm. But ET is 52,5 on these wheels. Will they fit to Veccy?

Thank you gentlemen!

**dibar74** · 28th April 2013, 13:10

Oh, wheel are "only" 6,5 wide and 17".

**Rebellion** · 28th April 2013, 17:33

Out of interest, which model of Ford is this wheel from?

**dibar74** · 28th April 2013, 18:35

Originally Posted by Rebellion

Out of interest, which model of Ford is this wheel from?

It`s 2001 2.0 mondeo ghia estate. It was lowered by the previous owner.

**Ian-Highlander** · 28th April 2013, 23:05

The Vectras need 5x110 with an offset between 35 and 42.

I think Mondeo's are 5x108 so wobbly bolts will sort that, but the offset is miles out and may put the entire balance of the car way off.

**dibar74** · 29th April 2013, 06:15

Originally Posted by Ian-Highlander

The Vectras need 5x110 with an offset between 35 and 42.

I think Mondeo's are 5x108 so wobbly bolts will sort that, but the offset is miles out and may put the entire balance of the car way off.

Thanks Ian! The offset was the main concern for me. So, I will sell them to some "sad" mondeo owner