few questions HELP !!!!

[G16RYO]

first is i have a set of hid's that i got of ebay a while back for my last car but now i have the vectra c i wanted to fit them in there but when i done that and turned them on they start fine and then start flickering can any1 help and shed some light in this please ?

second i tryed to fit led sidelights but when i do it turnes the warning light on my dash on and also causes my indicator light to come on and stay on? :-(

and third is there a way of connecting a sub (red white yellow) and remote wire to the back of the standard cd players?

any help on any would b great thanks and even if there is any1 close to glasgow or around that way that could help out with hid's and side lights that would be great as i am really not liking not having my hid's to me the make the car look so much better and plus can see alot better aswell thank again :-)

[Envy]

first is i have a set of hid's that i got of ebay a while back for my last car but now i have the vectra c i wanted to fit them in there but when i done that and turned them on they start fine and then start flickering can any1 help and shed some light in this please ?

second i tryed to fit led sidelights but when i do it turnes the warning light on my dash on and also causes my indicator light to come on and stay on? :-(

Best to get cancellers to stop the flickering, or if you know someone with either Tech2 or opcom get them to turn on the xenon option, then cancellers are not required.

Just an example. http://www.ebay.co.uk/itm/HID-Canbus...#ht_118wt_1142

I suspect these are cheap led lights. Most of us tend to use canbus error free sidelights. They will strobe when off and the car running which is why I always drive with sidelights on but I don't get errors with them.

Just and example. http://www.ebay.co.uk/itm/2-x-NO-ERR...ht_4088wt_1020

Hope that helps somehow

[G16RYO]

thanks mate i think i might just need to get them will them stop my hids from flickering?

and also them sidelights do you get any error messages with them sidelights? and btw thanks for the reply mate :-)

[Critch]

LEDs side lights will need to either buy some more expensive "canbus friendly" ones which don't always work 100% at making error free

Or wire in a second set of bulb holders and fit normal bulbs tucked out the way

or fit some resistors in parallel to bulb