would this be easier(arb bushes fitting)

[justin32]

When changing the front ARB bushes,would it be easier to just undo the 2 bolts nearly all the way and just slide the old one out and the new 1 in without having to take any of the bolts out?

Of isnt it that easy?

[happypostie]

When changing the front ARB bushes,would it be easier to just undo the 2 bolts nearly all the way and just slide the old one out and the new 1 in without having to take any of the bolts out?

Of isnt it that easy?

yes im sure that is how bob did his , as it is a pain to get the bolts back in if you take them out .

[veclee]

Hard work that way you need to remove front bolt completly then undo back bolt by 5-6 mm slid bar forward bracket pops off bush off bush on refit same way about 15-20 mins a side

[The boy]

Do the bolts for the brackets go into a welded but or do you need to try and get a spanner underneath on the nut??

[Emilian77]

Welded nut endeed

[The boy]

Sound thought it looked a bit awkward if it wasn't! Anyone know the bush size on a 1.9 cdti pre face Sri?