wheel spacers.

**marc vectra sri** · 11th April 2013, 10:08

How much should I go 10mm or 20mm on rear.

**DAVIDD88** · 11th April 2013, 10:24

Leave as is

**marc vectra sri** · 11th April 2013, 10:49

Even when it gets lowered won't the wheels look to far in

**hothatch** · 11th April 2013, 11:29

I read somewhere its best to go for hubcentric spacers. They start on 15mm.

**Caveman_nige** · 11th April 2013, 12:01

i used 20mm hubcentric spacers and the car was lowered 30mm.. it was spot on..

**ScotsDragon** · 11th April 2013, 12:32

Just a bit of useless info, According to this spec sheet the rear wheels are 5mm per side further in than fronts,

Capture.JPG

**marc vectra sri** · 11th April 2013, 14:08

@Caveman_nige you got any pics

I'm defo getting some as u say on that graph there 5mm shorter and u can tell

**d_ghedia** · 11th April 2013, 14:41

Originally Posted by ScotsDragon

Just a bit of useless info, According to this spec sheet the rear wheels are 5mm per side further in than fronts,

Is the same for estate and signum? I am convinced that the signum has a wider body at the back (and therefore a wider track)

**Leemarksmith** · 11th April 2013, 15:09

25mm rear and 16mm fronts on mine, could even do a few more mil if pushed it... I'd lower first then do a plumb line, then go for the look you want... There is a 9mm difference iirc front to cack hence my custom ones

**Caveman_nige** · 11th April 2013, 15:26

Originally Posted by marc vectra sri

@Caveman_nige you got any pics

I'm defo getting some as u say on that graph there 5mm shorter and u can tell

hmm not to hand as I am at work.. if you do a search for wheel spacers on here you will come across a few threads already where lee and I have posted pics on the cars with spacers.. there may be also be some in the link to the garage in my sig below