I have checked the wiring on my door loom and it seems I have 6 wires missing. What pins are used for Powerfolds or tinting door mirrors?
I have checked the wiring on my door loom and it seems I have 6 wires missing. What pins are used for Powerfolds or tinting door mirrors?
I have door looms in the car I'm breaking at the moment and has folding mirrors I can take pics tomoz
Thread moved to correct section
Mods : Insignia Washer Jets,Boot & Footwell LEDs,Reverse Cam,Pioneer AVH-3200BT,Pioneer TS-Q172C(front),Alpine MRVT407 V12 Amp,Alpine SBE-1243BR 12" Sub,In Car Freeview TV,Heko Wind Deflectors,Airbox mod,K&N Panel Filter,Irmscher Boot Spoiler,Angel Eyes, 50W 5K HIDs, 30mm Lo lowering springs, Eyebrows,17" Fox Alloys,Powerflow Stainless Steel dual exhaust. Winner-Best I.C.E-Heritage Centre Meet 2013
I might just do that if the existing loom isn't wired up!
Here is the existing O/S plug
IMG_1490[1].jpg
mirror has 10 pins and loom has 11 wires at the mirror connector
power mirrors only have 2 wires to each mirror,1 is extend and 1 is retract,
hope this info helps
passenger side mirror plug
pinout no 9 black/green
pinout no 10 black/brown
drivers side mirror plug
pinout no 9 black/brown
pinout no 10 black/green
simon by looking at that pic of tge plug you have the wires
present so you just need the door modules and mirrors then
a tech2 session.
Last edited by andy.l; 6th April 2013 at 20:04.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks