can you install front fogs on an insig se

**hippo** · 19th March 2013, 00:40

can you install front fogs on an insignia se i hear conflicting stories

**Mark Evison** · 19th March 2013, 01:22

More than likely you will need to replace the loom on your car as it wont have fog light plugs i had this problem with my vectra and the loom was £600 to retro fit properly so the lights come on the dash when there on etc. If the plugs are there you should be able to activate them by tech 2 at vauxhall. I got fog fitted on my insignia from the factory with the plus pack option.

**hippo** · 19th March 2013, 10:37

has any one had this done tho. i want a price as i may go for a insig se or an 09 plate vectra c design.....................
the se insig the only thing it hasn`t got that i would want...

**MadOnVaux!** · 1st April 2013, 14:54

Apparently fitting fogs on an Insignia without them is quite a drawn-out job, from what i was told it's not even just a quick Tech 2 job either once fitted.

**kenp** · 1st April 2013, 15:42

Not that easy... because you will need 2 trips to the dealer after you fitted them... as they need to send some codes to germany and get new back, to put in the car..

but happylightshow have made som wiring to help, with seperate module so you dont need a trip to the dealers..

**MadOnVaux!** · 1st April 2013, 15:59

Originally Posted by kenp

Not that easy... because you will need 2 trips to the dealer after you fitted them... as they need to send some codes to germany and get new back, to put in the car..

Yeah thats what it was! How long winded is that?? Sounds like overkill to me!

I just fitted fogs to my girlfriends Rover 25 and all i needed was the fogs, switch and relay!