DA pad's

**Mark-R** · 17th March 2013, 20:43

I'm needing new pads 2" and 6" padsfor my DA anyone suggest a good place to get them and has anyone tried out the microfibre finishing pad's

**k9vnd** · 17th March 2013, 22:18

What microfibre pad's? meguiar's?... i used to use chemical guys hexlogic pad's or lake county with my da but have switched recently to the flexipad's microfire,thought's are they work exreamly well with my range of wolf's chemical and menzderna polish's,but only slight drawback is not to overload with product and ensure you buy a suitable brush to give the pad a clean when working around the car.

**marc vectra sri** · 17th March 2013, 22:23

Use hex pads I've got one and it's great.

**Mark-R** · 17th March 2013, 22:23

Yeah its the flexipads spied these on ebay http://www.ebay.co.uk/itm/1809238765...84.m1423.l2649

**k9vnd** · 17th March 2013, 22:38

Should do, get mine from polished bliss. Like me you may find working with the microfibre polishing and depending what polish used then it will work wonder's over the cg hex white polishing pad and good finishing too,didn't have to refine down as much as i did with hex. 3-4 drop's of product to pad and work away panel at a time.
img0193ta.jpg

**Mark-R** · 17th March 2013, 22:48

Originally Posted by k9vnd

Should do, get mine from polished bliss. Like me you may find working with the microfibre polishing and depending what polish used then it will work wonder's over the cg hex white polishing pad and good finishing too,didn't have to refine down as much as i did with hex. 3-4 drop's of product to pad and work away panel at a time.
img0193ta.jpg

So that finish is with the microfibre pads

I have a bottle of poorboys world black hole and a couple of meguiars but the black hole was for my black car but ase you can see from my sig i got a blue one now will that still be ok to use on it.

**Mark-R** · 17th March 2013, 22:51

Originally Posted by marc vectra sri

Use hex pads I've got one and it's great.

I was looking at them too but was watching some detailing vids on youtube and the boy was using the microfibre cutting and finishing pads and the finish he was getting was unbelievable.