Any one know the easiest way to fit this with a xp2 body kit on.thanks in advance..
Any one know the easiest way to fit this with a xp2 body kit on.thanks in advance..
When you have the old one off and cleaned the paint work under it... You have two options really... If its a new vxr spoiler then it will have double sided tape on it already - if 2nd hand get some thin double sided tape and apply to the spoiler. You will also need some form of adhesive. The prefered method is using tiger seal.. But, this stuff is most readily found on the net/ebay etc. When i did mine i got this stuff: http://www.halfords.com/webapp/wcs/s...egoryId_255230
Lined up the spoiler to make sure it all fitted ok, put a line of the glue around the spoiler, peeled off the double sided tape and located on the boot. 24 hours for the glue to set with the help of some masking tape to ensure it did not move whilst curing.
3 years down the line, no movement whatsoever on the spoiler.
its the black piece that sits at the bottom of the bumper with the exhaust exit....
got the old one out but the new one just wont twist enough with the xp kit on...
oh, you mean defuser?
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks