rear interior light

**vmb2722** · 5th March 2013, 14:12

ribbon wire in place but no light, do i need front map light for it to work?

**lizard** · 5th March 2013, 17:12

No Matey, standard frontlight will be fine...

**Das** · 5th March 2013, 19:20

just cut the hole, feed the plug, pop it in place and bobs your mother brother. BTW go to VX and get the metal cage, its cheap, doubles as a template and holds the light more securely. Im sure the part number is in the how2 section.

**vmb2722** · 5th March 2013, 19:57

i didnt have the right ribbon so i had to wire it in, grr

**vmb2722** · 11th March 2013, 17:13

anyone know how to get the 4th button on the maplight to turn the rear lights on when youve wired them in yourself?

**Woody** · 11th March 2013, 18:03

I thought the 4th button was to switch all interior lights off completely ?

**brasch** · 11th March 2013, 22:26

Originally Posted by woodpeck

I thought the 4th button was to switch all interior lights off completely ?

it is.
Easiest way to get it is getting one with 4 buttons from ebay. I had 3 buttons and couldn't find a way to remove the blind without messing it all up

**kenp** · 11th March 2013, 23:25

But that dont turn off all the light ;-) only the front when the doors is open, the Rear one Will still be on....

**Woody** · 11th March 2013, 23:41

Originally Posted by kenp

But that dont turn off all the light ;-) only the front when the doors is open, the Rear one Will still be on....

Ok Ken, I knew I had read somewhere that it was an "OFF" switch rather than a rear seat "ON" switch

Thanks for the clear up fella

Cheers

Woody

**brasch** · 12th March 2013, 22:00

Might be, come to think of it, I haven't really noticed my rear lights ever been on. Might be switched off or not working at all - I might want to check that at some point.
anyone happen to know how to re-fit the buttons in the front light without bending the springs every time?