New Wheels Problem

[rmg1]

I bought a set of 18in wheels today that where fitted to an Astra H, but when trying them on don't seem to fit. I have measured the centre bore to be 75mm so looks like I will need spigot rings and the vectra wheel studs don't seem to fit either but maybe I just need a deep 17mm socket instead of the 17/19mm one. It looked like the wheel holes didn't line up but maybe that was to do with no spigot rings.

[shb1988]

If they were off an Astra h they should fit straight on mate?

[lee gsi]

What wheels are they as you might need 'tunner' bolts rather than normal bolts.

Ask the person you got them from.

[rmg1]

What wheels are they as you might need 'tunner' bolts rather than normal bolts.

Ask the person you got them from.

What are tunner bolts?

[cont1204]

Also called wobble bolts. Better option is to get some PCD adaptors though.

[lee gsi]

Also called wobble bolts.

Sorry not correct.

Tunner bolts are narrow bolts that you use a special tool to remove like this: http://www.ebay.co.uk/itm/20-x-Tuner...item2a1ff83759

[pogo]

Agree mate you most certainly need tuner bolts and spigot rings for them

[cont1204]

Sorry not correct.

Tunner bolts are narrow bolts that you use a special tool to remove like this: http://www.ebay.co.uk/itm/20-x-Tuner...item2a1ff83759

I shall eat my own words! Never heard of them before, just presumed that was what you meant.

I stand corrected!

[rmg1]

Thanks, they are Inspiri wheels if anybody would know the exact centre bore measurement.

[Ben50n]

Try the manufacturers or sellers website for centre bore sizes?