Piston rewind tool need ASAP Chesterfield in a pickle!

[Desolation91]

Hi guy

I have done the rear drivers side fine but the passengers won't budge! Looks likes its seized up! Tring to used needle nose and it's not working please if someone could pop over with one

Si

[ditchp]

i have one you can borrow if you can get down to notts or even bring the calliper down with you for me to wind back in....

[Desolation91]

Big thank you dude!

[ditchp]

glad to be of assistance and nice to meet you too

[Desolation91]

Going to have a trip to the scrap yard later, which cars rear brake calipers will fit the signum 2006 1.9 cdti?

[Desolation91]

would the one fitted on these fit as this is about 2 min walk from me!

http://www.ebay.co.uk/itm/VAUXHALL-V...a1c141e&_uhb=1

[paulhb]

That should be fine mate both solid disc 278mm variants from your profile.

[Rebellion]

would the one fitted on these fit as this is about 2 min walk from me!

http://www.ebay.co.uk/itm/VAUXHALL-V...a1c141e&_uhb=1

That should be fine mate both solid disc 278mm variants from your profile.

Errr....NO. The car in that ad is a 2 litre, which must be the 2.0T, which has 292mm vented disks, not the 278mm solid disks that the OP's car has.

[paulhb]

Errr....NO. The car in that ad is a 2 litre, which must be the 2.0T, which has 292mm vented disks, not the 278mm solid disks that the OP's car has.

Good point my error but as long as he uses his original carriers with the caliper he should be fine the 292mm caliper is only slightly wider with the same mechanisms fixings and brake pads as the 278mm carrier.

[Desolation91]

yeah thats right i have solid discs on, id be using the original carrier, ill wait and find a signum thats being broken, what am i looking for in a good replacement? good rubbers? clean or not?

si

would this be a better candidate? http://www.ebay.co.uk/itm/07-VAUXHAL...4504877&_uhb=1