smds for 2009 vectra info display

[thegman85]

sorry for double posting but i think i might have posted in the wrong place.
The question i have is what smds are in the cdc40 opera and the info display seens to have plcc-6 in the display but not sure. I have searched everywhere and i was advised to pm bigwilko but have not had a reply please help if u can.

[marc vectra sri]

there plcc4 I use plcc2 and off set them

[thegman85]

there plcc4 I use plcc2 and off set them

I have seen the how 2 with the plc4s and they have 4 legs but my display has eight 6 leged smds I am really desperately to finish dash

[thegman85]

i have now managed to do the cdc40 useing 0805s but still no where closer on the display ill post a picture tomorrow

[thegman85]

IMG_0427.jpgIMG_0428.jpg

[marc vectra sri]

u need the other side lol or the other board that connects on to it u should have a board with 36 or 34 leds

[thegman85]

above is the only pcb there is in it and the other side has no leds on it as that is the side that has the plug on it. The pic shows the side that faces the screen. I was exspecting to find 36 or 34 plcc-4s as pictured below but for some reason mine is different.but what i find is above only 10 x 6 pronged smdsPicture%2010.jpg

[marc vectra sri]

is there not anOther board below thsts board with a white backing on it with a connector on the back

[thegman85]

opened it back up to make sure im not being a plonker and to photos of everything
all.jpgfront.jpgIMG_0427.jpg

[thegman85]

is there not anOther board below thsts board with a white backing on it with a connector on the back

no just that board and a bit of glass.