my gid screen????

**marc vectra sri** · 11th February 2013, 07:18

My gid os blue and was blue when I bought it but it's very bright. Too bright will the leds be plcc2 so I can take them out and change the leds to bit dimmer ones

**michael_linford** · 11th February 2013, 07:22

I recall someone mentioned this before, I think he put a sheet of frosted perspex in there somewhere and it looked miles better! :-)

Sent from my Xperia S via Forum Runner

**dibar74** · 11th February 2013, 07:39

Originally Posted by michael_linford

I recall someone mentioned this before, I think he put a sheet of frosted perspex in there somewhere and it looked miles better! :-)

Sent from my Xperia S via Forum Runner

That`s easier work around for sure

I`d do just that, if I had problem with too bright screen.

**marc vectra sri** · 11th February 2013, 07:29

Frosted perplex lol what from

**michael_linford** · 11th February 2013, 07:31

Not sure, it's cheap enough on eBay though.
Dont think it was too thick, just enough to diffuse the light. :-)

Sent from my Xperia S via Forum Runner

**marc vectra sri** · 11th February 2013, 07:40

Cheers al get some is 3mm ok

**Ian-Highlander** · 11th February 2013, 09:45

That's why I used 0603's instead of PLCC2's on Rich's (Kman247) advice. Although they're tiny, each one's about a quarter of the size of a grain of rice (there's four in the bottom left of the pic below), but they give a MUCH better level of lighting compared to the rest of the dash.