Lowering Question?

[Del101]

I want to lower my vectra 06 1.9 cdti sri, and have seen people lowering the front 45mm and the rear 40mm, but kits I have found for that model only do one or the othe but don't do the different mm in one kit? where do you get these from? also would it be best to upgrated the shocks and bushers etc? could do with some advice?

Thanks

Andy

[franko]

hi mate ive gt a 1.9 cdti siggy and i put spax ssx sport kit on mine this lowered it 35mm at the front and 25mm at the rear and there not to harsh eather i never had to change any bushes just kept the standard ones hope this helps you out

[Del101]

thanks for that, but most kits i've looked at are ither or amount or the other? do you have to buy to kits?

[Leemarksmith]

The petrols seem to have the odd rated kits, diesels the matching... No idea why? My 2.2 has 45mm front and 40mm rear and its a straight 45mm front and rear on my cdti...

Only time I've seen the miss match like 45/40 for cdti axle weights is the cheapest of the cheap eBay kits but can't find one for you at min...

[franko]

I dont think spax are cheaper than cheap mate ive got them on my derv so you can get 35mm n25mm on a derv