started my led convertion am over the moon

[marc vectra sri]

So this afternoon I started my led convertion done door switch took half a hour the preface switch had more leds than the facelift also done a passenger switch aswel tried to do the alarm switch but when I plugged it in it would work half way in and only with lights off so unsure what's wrong there

[Mark-R]

looking good marc.

[marc vectra sri]

Cheers mate

[Das]

Nice. Not sure ive got the bottle to do it myself though, but would love white LEDs.

[marc vectra sri]

I was the same mate and it's really easy if ya take ya time I've never soldered before in my life lol and not burnt a board yet just doing headlight switch at the mo

[michael_linford]

Nice. Not sure ive got the bottle to do it myself though, but would love white LEDs.

I didn't think I could do it, but once I did the first switch and it lit up white, it just spurred me on!
Did mine in summer and still smile every time I put the lights on and think - I did that!

Sent from my Xperia S via Forum Runner

[marc vectra sri]

Headlight switch now done but before I done it 3 leds whernt working and still not working any ideas

[michael_linford]

Got them wrong way round? Or are they duds?

Sent from my Xperia S via Forum Runner

[marc vectra sri]

No the switch had some leds out on the numbers and on the dimmer I thought putting new leds in would work but must be broken board

[Ian-Highlander]

Retouch the solder joints on the micro resistors on the back of the board (the little black bits), they'll have dodgy solder joints, it's very common.