My washer jets have stopped spraying water but the pump in the bottle is still making a noise.
I have disconected the pipe going into the first jet but nothing is coming out.
Any ideas?
My washer jets have stopped spraying water but the pump in the bottle is still making a noise.
I have disconected the pipe going into the first jet but nothing is coming out.
Any ideas?
pull the pump out the bottle (in front of passenger side front wheel arch, then pull the little mesh filter out and clean it, probably gunked up, had to do it to a few cars now
i pulled the pump out but cant see a mesh filter, is it inside the hole where the pump goes?
cheers
When you pull the pump out, you then pull the black rubber mounting/grommet out ... the mesh is formed into the lower end of that.
Go to local garage and ask mechanic to use his blow line down the washers works every time ;-)
cheers all, will have a look in the morning and failing that will get my m8 to blast the line through
cheers
Where do you connect the air line to the pipework going back to the filter? And if you managed to do that you will only be blowing the gunge back into the washer reservoir - when I cleaned mine out it was like a thick gob of slime - which would soon work its way back to the filter and block it again
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks