Thank you Mr Postman

[mattbrad30]

Well not long got back from work after a 14 hr shift an the wife come in with a coffee an 2 parcels

Poorboys an clay bar

Any body got any advise how to go about cleaing the car just dont wanna mess it up

Also what lube is best for the clay bar

thanks lads

[Leemarksmith]

I just use a spray bottle with a bit of water and car shampoo, some say it depends on the bar used tho, I say "meh"...

[mattbrad30]

Its a bilt hamber bar

[wildchild]

Hi m8 either what lee said or a quick detail spray but with bilt hamber clay you only need water
gaz

[wildchild]

Have a nose over on detailing world its as good as here for info hth
gaz

[mattbrad30]

Thanks Matt

[Mark Evison]

Yer just warm water mate with a bit of shampoo in it if you wish, the clay just needs a lube to slide on (oh er)

[happypostie]

as said , just water in a spray bottle , just keeep it wet , i cut the bar into say 6 small pieces , as if you drop it bin it , once you wash the car dont dry it , just rub the clay bar over and you will feel it get smooth , knead the bit till you get a clean bit and carry on , making sure it is well lubed with the water , after you have done i would give the car a quick wash , then dry and go with the white diamond . round the whole car then wipe off , the sealant next but id leave that on for around 20 mins ( just time for a tea/coffee/beer ) then wipe that off . hope this helps .

[Leemarksmith]

Which is better, poorboys sealant or the nattys paste?

[happypostie]

Which is better, poorboys sealant or the nattys paste?

Lee not tried the nattys paste , but as you may know ive only been using a sealant on my car ( zaino ) for the last 2 years now and cant see me changing back to a wax . ive found that the wax will bead a bit better imo , but the sealant seems to give it the edge on the gloss side again imo .