Where do i find the washer water bottle lever plug?? I cant find it. :-/
Thanks: 0
Likes: 0
Where do i find....
Where do i find the washer water bottle lever plug?? I cant find it. :-/
Sometime soon will be so helpful guys lol as i got bumper off. Got hid to fit but need to locate plug for level sensor so i can get it done today!!
Wow, you waited all of 6 minutes for a response before complaining, chill a bit dude, people will help if they can when they can
Not all Vectras have the wiring for it, but here, see if this helps...
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
mine was tucked up behind the washer bottle, on the wheel side, there was also another large plug bound up with it too, not sure if all have them though?
The pic above is an old one from when I did the washer sensor on my old saloon. The large plug (which I've used on my estate now) is for the headlight washer pump.
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
Dont have the plug. I was impaitent cos needed bumper back on in time to get our boy from school lol
Heres a 1million pound question...
If i dont have washer level plug then how do i stop the bleeding washer level alert on screen without shorting the invisible plug?? Lol
Or as ian said, retro fit... Will how2 have it there like?
The washer sensor is just a make or break earth connection from a certain pin on the UEC. From memory I think it's pin 14 on the bottom of the UEC, you fit a wire in that pin and earth it and the error goes away or alternatively run a wire from that pin to a level sensor and the other side of the sensor to earth and you have a fully working level sensor
Search the forum to double check the pin number though, this is from memory and I don't trust myself lol
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
Call me cynical, but surely if the warning is up on your screen then you have the plug, wiring and the sensor?
Think the only way is to short the pins, or retrofit the level sensorOriginally Posted by Humourbash
Not necessarily if he's retro fitted the GID...
"Doing a good job here is like wetting your pants in a dark suit, you get a warm feeling but nobody else notices"
Maptun Tuned 2.0T Estate - click HERE for mods list.Brentwood 2012: Winner, Saturday Show. Hull 2012: Winner, Best Estate. Hull 2013: Winner, Best Estate & Runner Up, Best I.C.E
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks