Originally Posted by
Neve'o
I lightly rubbed the sensors down with some 800 wet & dry (wet) then wiped over with some panel wipe (meths also works well for this) then a couple of light coats of the white primer, leave to dry for an hour, lightly rubbed the primer with 1200 (again wet) to smooth it off, wipe again, then 2 or 3 light coats of the silver to build it up and get even coverage, allow 10 minutes between coats. Then after an hour or so a couple of light coats of the clear. Leave to dry for at least 24hrs before fitting otherwise the paint will still be soft and mark easily whilst fitting them, I actually left mine a week although a couple of days should suffice this time of year imo.
Bookmarks