I went out and tried the pedal test on my Z30DT and i'm coming up with codes
P0638
P0400
P1900
if anybody could tell me what these actually mean.
I went out and tried the pedal test on my Z30DT and i'm coming up with codes
P0638
P0400
P1900
if anybody could tell me what these actually mean.
Can't help on the others without looking them up but p0400 is egr flow malfunction
P0638 looks like Throttle Sensor
Try this website
http://www.obd-codes.com/trouble_codes/
P1900
Can be a generic code produced by the other faults.
But
IIRC on the V6 it's due to interrupted DPF re-gens if fitted.
Sounds like the car needs an Italian tune up ================
Last edited by C-Owner; 26th September 2012 at 20:28.
How do I get her to do a regen, I drove about 13miles home tonight at 70mph in 4th @ 3000rpm but as soon as I slowed down to turn in at a junction she went into limp mode again. There was also a new egr valve fitted last week.which I thought would help as the last that was the fault that was showing.
Can you force a regen with Tech 2 etc?
I'm hoping to get tech2 plugged in within the next week
I have a couple of questions....Are the DPF cleaners any good?How much would a new DPF cost?And can you get a DPF bypass pipe for the Z30DT?
You won't need new DPF but their usually in region of £800
the cleaners are more of gimic.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks