key fob buttons

[IRvectra786]

hi guys, My buttons are really worn on both keys & want to replace them my self i know how to open the key fob. as ive replaced batteries before, how do I replace the buttons any tutorials or pictures how to do it, its a vectra c key 2005 three button key, this is the replacement i have found.

any help?

[Mark-R]

have a look on ebay you will get the full lot and just change the inside or you can convert it to a flip key like i just did with mine

[IRvectra786]

have a look on ebay you will get the full lot and just change the inside or you can convert it to a flip key like i just did with mine

yes ive seen it sorry my question how do i remove the circuit board, thats what i want full lot.

[Mark-R]

Push it out from the button side don't try pull it out from the battery as you might pull the battery off the circuit board.

So all you do is push one of the buttons and it will pop out.

[IRvectra786]

gott it ! thankk you mate! can order 2 off ebay now :d

[Mark-R]

You're welcome happy to help when needed

[Z80]

I changed my rubber buttons plus microswitches out of kit I found on eBay.

Then I also ordered a flip-key one. The repaired standard ones is just kept as spare.