Hi
Just looking for some advice on the results of a power run I had done today, it's an apparently standard z19dth
Peak power 159.7bhp @3843 rpm
peak torque 230.0 lb ft at 3280 rpm
Do these figures match what it should be?
Cheers
Hi
Just looking for some advice on the results of a power run I had done today, it's an apparently standard z19dth
Peak power 159.7bhp @3843 rpm
peak torque 230.0 lb ft at 3280 rpm
Do these figures match what it should be?
Cheers
Yeah, that's about right, it can range from 145-160 dependant on current state of service etc.
What did the graph look like?
these are the printouts
bhp.jpgtorque.jpg
That's a very smooth line indeed
bang on for a standard 16v mate
A very healthy 1.9 150 there.
thats what i like to hear, remap time me thinks. Done everything important last week, intake manifold, dmf and clutch kit so she should be good for a while.
Cheers
Can recommend Ben at MAS Performance, see here http://www.vectra-c.com/forum/showth...=1#post1886335
I had 153bhp, 243lb/ft standard, and left with 189.1bhp and 295lb/ft
Good figures there - official figures are 148bhp and 235lb/ft
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks