The CIDVI-AH/VC unit is an interface adaptor for Opel wide16:9 CID (Color Info Display) OEM available in car providing video input auxiliary
This adaptor is a professional and quality product that allows you to integrate an external Video source to your cars factory fitted CID Screen. Once connected it gives you the ability to connect an In car DVD player, iPod Video, CarPC, DVB-T TV Tuner, Rear View Camera, Car Navigation GPS etc to keep your passengers entertained.
Features and Capabilities
Compatible to CID available for Vectra C / Signum / Astra H / Zafira B / Corsa C / Corsa D/ Antara / Meriva A / Vivaro connected to the following entertainment head units: CD30, CD30 MP3, CD50 Phono, CDC40 Opera, CD70 Navi, DVD90 Navi and DVD100 Navi.
Watch any Video source on your original Factory fitted CID Screen
The interface accepts CVBS/FBAS (composite) analog input or S-video analog input, up to three CVBS inputs or one S-video input.
NTSC and PAL TV system compatibility. NTSC (M, 4.34) and PAL (B, D, G, H, I, M, N, N combination), PAL (60) with automatic format detection
Wide 16:9 image format.
Digital Video processor providing high quality picture.
Image control: three preset modes and one user defined mode with independent programmable hue, brightness, saturation, contrast, sharpness for either composite and S-Video signals.
Automatic detection of video input signals. Blue screen for video inputs without signals.
Automatically switch and display the view from rear view camera when the car is placed in the reverse.
Automatically switch and display the view from front view camera for 20s when the gear was changed from reverse to forwarding.
Automatically switch and display the main CID screen for viewing the caller’s name (Opel Phone car kit)
Configuration for a reverse camera which does not render "the image in the mirror"
Low Power consumption during video processing.
Down the consumption of the battery while the CID-controller displays the image or when the CID is turned off.
Automatic scanning and storage of video input with video device attached.
Factory reset: restore image parameter to factory default.
Video Interface Kit Part List
1. Video Interface board
2. Video cable for two composite (RCA female) video inputs
3. Video cable for one composite (RCA female) and one S-Video (SVHS female) video input.
4. Control cable push button signal, rear view camera signal and Telmute signal.
5. 30 pole flexible flat cable/ribbon cable for inside connection
NOTE: This kit is not including the CID display. You should have the CID running in your car.
The Installation is relatively simple and does not require modification of the electrical equipment of the car. The video interface does not require any soldering and separate power. You have only to open the CID and connect the interface inside using the ribbon cable available in the KIT. I will email the buyer the installation manual detailing all these steps with pictures and explanations. The video interface board is related only to 16:9 wide CID model available in Vectra C, Signum, Astra H, Zafira B, Antara, Corsa C & D, Meriva A / Vivaro cars.
Price & Delivery
Looking for £100 ono inclusive of postage via Paypal Only and I will throw in 2 Ipod Video cables to RCA compatible with the interface - Support can be given via Phone / Email for installation but it is pretty simple and I will provide all needed documentation.
Also looking to sell OPC Steering Wheel with Full Black Trim and OPC Gear Lever Assembly ... will be coming in another thread soon when I get it out of the car!