Been busy again!

**new boy** · 29th July 2012, 13:39

Put some 9.5mm spacers on the rear to fill out the arches a bit and put some silvatec indecatior bulbs in to lose the fried egg effect. Heres some pics.
Before

After

Before

After

All this to get a bulb out!

**Graham** · 29th July 2012, 13:47

Nice stance. Does it effect your toe in toe out regarding your geometry? Do you need longer bolts?

Not so sure about your lights but thats your choice.

**new boy** · 29th July 2012, 13:54

I got long bolts when i got the wheels/tyers so they all ok. Not sure but i dont think it will make any difference to geometry as its only a few mm.

**Bigtee** · 29th July 2012, 13:58

Nice jack where did you get that?

Mine is crap!!

**new boy** · 29th July 2012, 14:02

Here m8
http://www.ebay.co.uk/itm/QUALITY-SE...item3cb52ca6c6

**new boy** · 29th July 2012, 16:10

Heres a pic of the spacer on the hub.

**paulvectrac** · 29th July 2012, 16:16

looks alot better mate top job

**new boy** · 29th July 2012, 16:28

Thanks m8

**Signum7060** · 29th July 2012, 18:37

Originally Posted by Graham

...Does it effect your toe in toe out regarding your geometry?...

Both the spacing and the bulbs look great mate - very worthwhile! Like Graham said, I also wonder if the spacers might affect the toe-in, toe-out geometry or scrub off the inner tyre shoulders?

**Niall83** · 29th July 2012, 18:42

Looking very nice. The silver bulbs take away the orange look nicely.

[QUOTE=Graham;
Not so sure about your lights but thats your choice.[/QUOTE]

Whats wrong with them? It's the standard SRI lights. He just changed the orange bulbs for silver which leaves a nice stealth look.